Stereo Tool :: Stereo Tool 8.12

Wavosaur no longer loads the VST plugin (we use it for batch processing), I also have experienced sometimes Foobar with Stereotool as fixed VST loaded (we use it for offline fine tuning the .sts) when started no longer processes audio.

Don't know why but affinities settings is not saving correctly.

Example:
In Main 1 and Main 2 (with 2 threads), under Processing - CPU core tab, if set CORE 3, after a software restart it will be ANY again...

Bug in the FM Soundcard Calibration section using the DSP version. When enabled the audio output level drops really low. when disabled the level comes back to normal. This behavior does not exist in Stereo Tool 8.00.

I know this section has been superseded by FM tilt but I still use this to correct the frequency response of my transmitter and to adjust the RDS to Stereo Poilet phase.

Hi Hanz,

With version 8.12 on one transmitter site, I have small perturbations in the sound (like a small scratch may be every 10 sec). When I rollback to 8.00, no problem.
CPU: Intel Xeon W3540 @2.93GHz 8 cores (cpu load with 8.00 20% for all cores and 56% on 2 cores)
Sound Card: input: VB-Audio Virtual Cable / FM Output: ESI Julia Asio Chan1

I have try with 4 or 6 threads, same problem on 8.12

An idea ?
Thanks

Author:	nunoserra [ Sun Nov 06, 2016 11:56 pm ]
Post subject:	Re: Stereo Tool 8.12
Don't know why but affinities settings is not saving correctly. Example: In Main 1 and Main 2 (with 2 threads), under Processing - CPU core tab, if set CORE 3, after a software restart it will be ANY again...

Author:	hvz [ Mon Nov 07, 2016 2:37 pm ]
Post subject:	Re: Stereo Tool 8.12
Quote: Wavosaur no longer loads the VST plugin (we use it for batch processing), I also have experienced sometimes Foobar with Stereotool as fixed VST loaded (we use it for offline fine tuning the .sts) when started no longer processes audio. Just tried Wavosaur here and it works fine (both 32 and 64 bit). Can you give me more info of what happens exactly? Do you get an error message?

Author:	hvz [ Mon Nov 07, 2016 2:39 pm ]
Post subject:	Re: Stereo Tool 8.12
Quote: Don't know why but affinities settings is not saving correctly. Example: In Main 1 and Main 2 (with 2 threads), under Processing - CPU core tab, if set CORE 3, after a software restart it will be ANY again... I see it gets overwritten by the LQLL CPU core affinity settings. Fixed for the next beta.

Author:	berrall [ Mon Nov 07, 2016 8:50 pm ]
Post subject:	Re: Stereo Tool 8.12
Bug in the FM Soundcard Calibration section using the DSP version. When enabled the audio output level drops really low. when disabled the level comes back to normal. This behavior does not exist in Stereo Tool 8.00. I know this section has been superseded by FM tilt but I still use this to correct the frequency response of my transmitter and to adjust the RDS to Stereo Poilet phase.

Author:	arche [ Tue Nov 08, 2016 7:11 am ]
Post subject:	Re: Stereo Tool 8.12
Not only the DSP version, it is in standalone too.

Stereo Tool https://www.forums.stereotool.com/

Stereo Tool 8.12 https://www.forums.stereotool.com/viewtopic.php?t=12543	Page 3 of 4

Author:	hvz [ Wed Nov 09, 2016 1:21 pm ]
Post subject:	Re: Stereo Tool 8.12
Quote: Bug in the FM Soundcard Calibration section using the DSP version. When enabled the audio output level drops really low. when disabled the level comes back to normal. This behavior does not exist in Stereo Tool 8.00. I know this section has been superseded by FM tilt but I still use this to correct the frequency response of my transmitter and to adjust the RDS to Stereo Poilet phase. Cause found and solved (next beta).

Author:	stef007 [ Thu Nov 10, 2016 11:43 am ]
Post subject:	Re: Stereo Tool 8.12
Hi Hanz, With version 8.12 on one transmitter site, I have small perturbations in the sound (like a small scratch may be every 10 sec). When I rollback to 8.00, no problem. CPU: Intel Xeon W3540 @2.93GHz 8 cores (cpu load with 8.00 20% for all cores and 56% on 2 cores) Sound Card: input: VB-Audio Virtual Cable / FM Output: ESI Julia Asio Chan1 I have try with 4 or 6 threads, same problem on 8.12 An idea ? Thanks

Author:	hvz [ Thu Nov 10, 2016 1:24 pm ]
Post subject:	Re: Stereo Tool 8.12
Quote: Hi Hanz, With version 8.12 on one transmitter site, I have small perturbations in the sound (like a small scratch may be every 10 sec). When I rollback to 8.00, no problem. CPU: Intel Xeon W3540 @2.93GHz 8 cores (cpu load with 8.00 20% for all cores and 56% on 2 cores) Sound Card: input: VB-Audio Virtual Cable / FM Output: ESI Julia Asio Chan1 I have try with 4 or 6 threads, same problem on 8.12 An idea ? Thanks Since it's at the transmitter site I suppose you can't install 8.12 on it again and give me TeamViewer access? Can you send me your settings so I can check if I see something weird here? I need all the settings, including sound card and CPU. My only guess right now is that you have set the ASIO buffer size to the absolute minimum to reduce latency. But... I did tests here and that should actually work better on 8.12 than on 8.00. But I might have missed something. There are more people who are complaining about similar things. Edit: I think I just found something suspicious... Edit #2: We have an O, we have an O, we have a P, we have an S... OOPS!

Author:	DJ-DOGGY [ Thu Nov 10, 2016 1:41 pm ]
Post subject:	Re: Stereo Tool 8.12
We`ll have a F, we`ll have an I, we`ll have an X. We`ll have a FIX

Author:	stef007 [ Thu Nov 10, 2016 2:02 pm ]
Post subject:	Re: Stereo Tool 8.12
Hi Hans, Thanks for your answer, I have email you my stereo_tool.ini I don't remerber have changed default buffer size for asio. PS: Your Edit2 tell us that you find something ? Regards Stef

Page 3 of 4	All times are UTC+02:00
Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/