Stereo Tool
https://www.forums.stereotool.com/

Stereo Tool 7.85 BETA
https://www.forums.stereotool.com/viewtopic.php?t=7262		 Page 17 of 59
Author:  bigic [ Tue Feb 09, 2016 4:39 pm ]
Post subject:  Re: Stereo Tool 7.85 BETA
Quote:
this question

What do you mean what polar stereo how it works, what benefits have a sound working ?
For those outside of former USSR it does nothing. But there are countries in the ex-USSR where OIRT FM band and polar stereo system are extensively used: Russia, Ukraine, Belarus etc., so it's useful for FM transmissions in these countries.
Author:  hvz [ Wed Feb 10, 2016 12:22 pm ]
Post subject:  Re: Stereo Tool 7.85 BETA
7.85 BETA028

Windows 32 bit:
Windows stand alone: http://www.stereotool.com/download/ster ... 85-028.exe
Winamp DSP: http://www.stereotool.com/download/dsp_ ... 85-028.exe
Windows VST 32 bit: http://www.stereotool.com/download/vst_ ... 85-028.dll

CHANGED:
- Fixed bug in HARD LIMIT introduced in BETA027 (caused crashes).
- Added slider to Exciter to choose between a more natural spectrum which however sounds more distorted, vs a very clean sound but with shrill tones in it. Will try to get rid of this slider and automatically choose the correct setting soon!

OLD CHANGES:
- Polar stereo: K filter added, but output is not strictly clipped anymore. Waiting for feedback.
- Add AM test tone: Sawtooth with pause at 0, asymmetrical. LPF needed?
- Fixed crackle at startup caused by Ignore high frequencies (even if it was disabled!)
- Loading old preset from before Analog mode was added apparently loads in Analog mode! -> Works now, just no idea why??
- Exciter: Crash should be fixed.
- Exciter: Sometimes you see darker bars in the spectrum, changing the overlap back and forth removes those, so somehow some levels aren't always calculated when a setting is changed.
- Fixed crash when closing
- Exciter: Moved to separate page, for now called Absolute Highs.
- Exciter: Added GUI element to show Absolute Highs effect.
- Exciter: Broken at latency 512
- GUI: Fixed hangups caused by tooltips.
- GUI: Remove dots in changed settings for some buttons on top of the screen.
- Exciter: Made frequency range configurable!!! (Old default numbers were 8000-9000 Hz)
- Blog post pre-processing, MP3 and declipping
- GUI: Added tooltips!
- Added exciter (rest of list removed)
- Added (not yet fully ok) Polar Stereo support for OIRT FM stations.
- Error (crash) on some systems should be solved
- Show something in settings that have been changed (for example a dot next to the name of the setting).
- Add license check function: extern "C" bool stereoTool_IsLicenseValid(gStereoTool* st_instance);
- Make scope skinnable
- Bug: i found one malfunction in the BS412 Section: If your switch off the FM Option and leave the BS412 Limiter in On-Position the Advanced Clipper only works in a reduced way: You can´t change the Clipper drive even if you pull the handle. The BS412 Limiter is greyed out instead so maybe someone doesn´t find the failure. If You switch the BS412 to off everything works fine again! Just a small detail, but maybe someone will have problems… -> I think I have fixed it (but there are a lot of different combinations of settings that can impact the result, I hope I haven't missed any). The next version shouldn't have this problem anymore, also, when BS412 is used I have now disabled the Advanced Clipper Drive slider.
I've been busy hiding a lot more deprecated features (if they are set to their default value). This should make the GUI a bit simpler. Stuff that's now hidden (still there and still functional if you really want to use it):
- "Bass AGC (Old)" panel
- "Classic Multiband Compressor" panel
- "Classic Singleband" panel
- "Pre-limiter" panel (in Advanced Clipper)
- "Leif's clipper efficiency modification" checkbox
- "Composite clipping Strictness (CPU)" checkbox
- Phase rotation: ""At start of processing" checkbox
- AGC "Compatibility & behavior" header
- All Singleband and Multiband "Compressor type" (Analog/Digital) pull-downs
- Multiband and Natural Dynamics "Compatibility mode (bad)" for Flat Frequency Response checkbox
- "Bass protection (Deprecated)" header in Advanced Clipper -> Bass
- "Highs gap protection: *" in Advanced Clipper -> Highs
- "Smooth slope" in Advanced Clipper -> Distortion
- "Upsampled highs clipping (useless)" in Advanced Clipper -> Distortion
- Stokkemask: "Force Stokkemask even if not using Composite Clipping (bad for audio)"
- BS412: ""De-basser non-ITU.1770 compatibility mode (bad)"
- Right clicking now restores default again, mid or double right clicking restores last loaded preset (or startup) value.
Bug: If you use FM and Normal output, with separately processed audio for streaming for Normal output, and for FM output enable pre-emphasis but *not* pre-emphasize output, then Normal output is not processed separately!
- What is the pink line in the BS412 display? Maybe remove it. http://i.imgur.com/70mWvqp.png -> Ah no, it's the adjustment of the compressor thresholds. Needs to be added to Help page.
- BS412 has VERY narrow jump on de-basser from 240 to 250 Hz. (Jump of multiple dB's). -> No, brown line jumps but actual output is smooth, so no problem.
- BS412 bass filter doesn't use ITU1770 as it should but some weird other shape that goes up to about 250 Hz.
- Need to support 2 default values and a RESET TO LAST LOADED VALUE reset option.
- Hide not selected deprecated stuff - partially working!
- Move Copyright stuff etc. also to command line version (maybe just copy it?)

TODO:
- Voice protection in classic MB is broken. Check what changed. (Code should not have changed at all). - Hm, more has changed. Check in which version! -> Waiting for reply to question
- MB: Make Overview window for new Multiband! For main settings.
- MB: Add voice volume protection, don't allow mid bands to drop below surrounding (to some extent), protectes voices and it might help to replicate the sound of certain other processors :)
- Exciter: Try to improve tone behavior (should also reduce whole area around a spike I think - maybe configurable?)
- Exciter: Improve further, and make it configurable.
- Add Polar stereo viewtopic.php?f=16&t=6233&p=33031#p33031
- MP3?
- Try adding phase delay compensation
- O skin
- Also show tooltips for blocks of parameters.
- Continue with finding parameters to hide
Author:  cornyman [ Wed Feb 10, 2016 2:36 pm ]
Post subject:  Re: Stereo Tool 7.85 BETA
Quote:
- MB: Add voice volume protection, don't allow mid bands to drop below surrounding (to some extent), protectes voices and it might help to replicate the sound of certain other processors
Nice :)
Author:  Bojcha [ Thu Feb 11, 2016 2:01 am ]
Post subject:  Re: Stereo Tool 7.85 BETA
Quote:
Quote:
- MB: Add voice volume protection, don't allow mid bands to drop below surrounding (to some extent), protectes voices and it might help to replicate the sound of certain other processors
Nice :)
That's avaliable already. Trick is in band coupling slider.
Author:  cornyman [ Thu Feb 11, 2016 8:55 am ]
Post subject:  Re: Stereo Tool 7.85 BETA
Quote:
Quote:
Quote:
- MB: Add voice volume protection, don't allow mid bands to drop below surrounding (to some extent), protectes voices and it might help to replicate the sound of certain other processors
Nice :)
That's avaliable already. Trick is in band coupling slider.
Thank you, Bojcha.
Author:  hvz [ Thu Feb 11, 2016 1:05 pm ]
Post subject:  Re: Stereo Tool 7.85 BETA
7.85 BETA029

Windows 32 bit:
Windows stand alone: http://www.stereotool.com/download/ster ... 85-029.exe
Winamp DSP: http://www.stereotool.com/download/dsp_ ... 85-029.exe
Windows VST 32 bit: http://www.stereotool.com/download/vst_ ... 85-029.dll

NO CHANGES EXCEPT AN AM TEST TONE! So unless you're the one who requested this you might want to skip this beta.

CHANGED:
- Fixed AM sawtooth test tone, adjusted level of other test tones when using AM.

OLD CHANGES:
- Fixed bug in HARD LIMIT introduced in BETA027 (caused crashes).
- Added slider to Exciter to choose between a more natural spectrum which however sounds more distorted, vs a very clean sound but with shrill tones in it. Will try to get rid of this slider and automatically choose the correct setting soon!
- Polar stereo: K filter added, but output is not strictly clipped anymore. Waiting for feedback.
- Add AM test tone: Sawtooth with pause at 0, asymmetrical. LPF needed?
- Fixed crackle at startup caused by Ignore high frequencies (even if it was disabled!)
- Loading old preset from before Analog mode was added apparently loads in Analog mode! -> Works now, just no idea why??
- Exciter: Crash should be fixed.
- Exciter: Sometimes you see darker bars in the spectrum, changing the overlap back and forth removes those, so somehow some levels aren't always calculated when a setting is changed.
- Fixed crash when closing
- Exciter: Moved to separate page, for now called Absolute Highs.
- Exciter: Added GUI element to show Absolute Highs effect.
- Exciter: Broken at latency 512
- GUI: Fixed hangups caused by tooltips.
- GUI: Remove dots in changed settings for some buttons on top of the screen.
- Exciter: Made frequency range configurable!!! (Old default numbers were 8000-9000 Hz)
- Blog post pre-processing, MP3 and declipping
- GUI: Added tooltips!
- Added exciter (rest of list removed)
- Added (not yet fully ok) Polar Stereo support for OIRT FM stations.
- Error (crash) on some systems should be solved
- Show something in settings that have been changed (for example a dot next to the name of the setting).
- Add license check function: extern "C" bool stereoTool_IsLicenseValid(gStereoTool* st_instance);
- Make scope skinnable
- Bug: i found one malfunction in the BS412 Section: If your switch off the FM Option and leave the BS412 Limiter in On-Position the Advanced Clipper only works in a reduced way: You can´t change the Clipper drive even if you pull the handle. The BS412 Limiter is greyed out instead so maybe someone doesn´t find the failure. If You switch the BS412 to off everything works fine again! Just a small detail, but maybe someone will have problems… -> I think I have fixed it (but there are a lot of different combinations of settings that can impact the result, I hope I haven't missed any). The next version shouldn't have this problem anymore, also, when BS412 is used I have now disabled the Advanced Clipper Drive slider.
I've been busy hiding a lot more deprecated features (if they are set to their default value). This should make the GUI a bit simpler. Stuff that's now hidden (still there and still functional if you really want to use it):
- "Bass AGC (Old)" panel
- "Classic Multiband Compressor" panel
- "Classic Singleband" panel
- "Pre-limiter" panel (in Advanced Clipper)
- "Leif's clipper efficiency modification" checkbox
- "Composite clipping Strictness (CPU)" checkbox
- Phase rotation: ""At start of processing" checkbox
- AGC "Compatibility & behavior" header
- All Singleband and Multiband "Compressor type" (Analog/Digital) pull-downs
- Multiband and Natural Dynamics "Compatibility mode (bad)" for Flat Frequency Response checkbox
- "Bass protection (Deprecated)" header in Advanced Clipper -> Bass
- "Highs gap protection: *" in Advanced Clipper -> Highs
- "Smooth slope" in Advanced Clipper -> Distortion
- "Upsampled highs clipping (useless)" in Advanced Clipper -> Distortion
- Stokkemask: "Force Stokkemask even if not using Composite Clipping (bad for audio)"
- BS412: ""De-basser non-ITU.1770 compatibility mode (bad)"
- Right clicking now restores default again, mid or double right clicking restores last loaded preset (or startup) value.
Bug: If you use FM and Normal output, with separately processed audio for streaming for Normal output, and for FM output enable pre-emphasis but *not* pre-emphasize output, then Normal output is not processed separately!
- What is the pink line in the BS412 display? Maybe remove it. http://i.imgur.com/70mWvqp.png -> Ah no, it's the adjustment of the compressor thresholds. Needs to be added to Help page.
- BS412 has VERY narrow jump on de-basser from 240 to 250 Hz. (Jump of multiple dB's). -> No, brown line jumps but actual output is smooth, so no problem.
- BS412 bass filter doesn't use ITU1770 as it should but some weird other shape that goes up to about 250 Hz.
- Need to support 2 default values and a RESET TO LAST LOADED VALUE reset option.
- Hide not selected deprecated stuff - partially working!
- Move Copyright stuff etc. also to command line version (maybe just copy it?)

TODO:
- Add another AM test tone, sawtooth with cut off bottom
- Add 'Forcibly remove' to AM settings? Or is this a problem with the transmitter that the tester on Radioforum uses? -> Regardless, I've added it now.
- Voice protection in classic MB is broken. Check what changed. (Code should not have changed at all). - Hm, more has changed. Check in which version! -> Waiting for reply to question
- MB: Make Overview window for new Multiband! For main settings.
- MB: Add voice volume protection, don't allow mid bands to drop below surrounding (to some extent), protectes voices and it might help to replicate the sound of certain other processors :)
- Exciter: Try to improve tone behavior (should also reduce whole area around a spike I think - maybe configurable?)
- Exciter: Improve further, and make it configurable.
- Add Polar stereo viewtopic.php?f=16&t=6233&p=33031#p33031
- MP3?
- Try adding phase delay compensation
- O skin
- Also show tooltips for blocks of parameters.
- Continue with finding parameters to hide
Author:  tjh [ Thu Feb 11, 2016 10:56 pm ]
Post subject:  Re: Stereo Tool 7.85 BETA
Quote:
7.85 BETA029

NO CHANGES EXCEPT AN AM TEST TONE! So unless you're the one who requested this you might want to skip this beta.
029 is a bigger version than 028

Therefore I WILL TEST THIS VERSION RIGHT VERY NOW THANK SO MUCH THE END.

:P
Author:  hvz [ Fri Feb 12, 2016 6:10 pm ]
Post subject:  Re: Stereo Tool 7.85 BETA
7.85 BETA030

Windows 32 bit:
Windows stand alone: http://www.stereotool.com/download/ster ... 85-030.exe
Winamp DSP: http://www.stereotool.com/download/dsp_ ... 85-030.exe
Windows VST 32 bit: http://www.stereotool.com/download/vst_ ... 85-030.dll

Absolute Highs seems to be nearly finished now! Please set the "Pass squeeks" setting to 100% (default is 200%!). I kinda forgot to remove it, it's now determined automatically and the slider shouldn't be needed anymore (but setting it about 100% will still cause squeeky sounds).

CHANGED:
- Exciter: Try to improve tone behavior (should also reduce whole area around a spike I think - maybe configurable?)
- Add another AM test tone, sawtooth with cut off bottom
- Add 'Forcibly remove' to AM settings? Or is this a problem with the transmitter that the tester on Radioforum uses? -> Regardless, I've added it now.

OLD CHANGES:
- Fixed AM sawtooth test tone, adjusted level of other test tones when using AM.
- Fixed bug in HARD LIMIT introduced in BETA027 (caused crashes).
- Added slider to Exciter to choose between a more natural spectrum which however sounds more distorted, vs a very clean sound but with shrill tones in it. Will try to get rid of this slider and automatically choose the correct setting soon!
- Polar stereo: K filter added, but output is not strictly clipped anymore. Waiting for feedback.
- Add AM test tone: Sawtooth with pause at 0, asymmetrical. LPF needed?
- Fixed crackle at startup caused by Ignore high frequencies (even if it was disabled!)
- Loading old preset from before Analog mode was added apparently loads in Analog mode! -> Works now, just no idea why??
- Exciter: Crash should be fixed.
- Exciter: Sometimes you see darker bars in the spectrum, changing the overlap back and forth removes those, so somehow some levels aren't always calculated when a setting is changed.
- Fixed crash when closing
- Exciter: Moved to separate page, for now called Absolute Highs.
- Exciter: Added GUI element to show Absolute Highs effect.
- Exciter: Broken at latency 512
- GUI: Fixed hangups caused by tooltips.
- GUI: Remove dots in changed settings for some buttons on top of the screen.
- Exciter: Made frequency range configurable!!! (Old default numbers were 8000-9000 Hz)
- Blog post pre-processing, MP3 and declipping
- GUI: Added tooltips!
- Added exciter (rest of list removed)
- Added (not yet fully ok) Polar Stereo support for OIRT FM stations.
- Error (crash) on some systems should be solved
- Show something in settings that have been changed (for example a dot next to the name of the setting).
- Add license check function: extern "C" bool stereoTool_IsLicenseValid(gStereoTool* st_instance);
- Make scope skinnable
- Bug: i found one malfunction in the BS412 Section: If your switch off the FM Option and leave the BS412 Limiter in On-Position the Advanced Clipper only works in a reduced way: You can´t change the Clipper drive even if you pull the handle. The BS412 Limiter is greyed out instead so maybe someone doesn´t find the failure. If You switch the BS412 to off everything works fine again! Just a small detail, but maybe someone will have problems… -> I think I have fixed it (but there are a lot of different combinations of settings that can impact the result, I hope I haven't missed any). The next version shouldn't have this problem anymore, also, when BS412 is used I have now disabled the Advanced Clipper Drive slider.
I've been busy hiding a lot more deprecated features (if they are set to their default value). This should make the GUI a bit simpler. Stuff that's now hidden (still there and still functional if you really want to use it):
- "Bass AGC (Old)" panel
- "Classic Multiband Compressor" panel
- "Classic Singleband" panel
- "Pre-limiter" panel (in Advanced Clipper)
- "Leif's clipper efficiency modification" checkbox
- "Composite clipping Strictness (CPU)" checkbox
- Phase rotation: ""At start of processing" checkbox
- AGC "Compatibility & behavior" header
- All Singleband and Multiband "Compressor type" (Analog/Digital) pull-downs
- Multiband and Natural Dynamics "Compatibility mode (bad)" for Flat Frequency Response checkbox
- "Bass protection (Deprecated)" header in Advanced Clipper -> Bass
- "Highs gap protection: *" in Advanced Clipper -> Highs
- "Smooth slope" in Advanced Clipper -> Distortion
- "Upsampled highs clipping (useless)" in Advanced Clipper -> Distortion
- Stokkemask: "Force Stokkemask even if not using Composite Clipping (bad for audio)"
- BS412: ""De-basser non-ITU.1770 compatibility mode (bad)"
- Right clicking now restores default again, mid or double right clicking restores last loaded preset (or startup) value.
Bug: If you use FM and Normal output, with separately processed audio for streaming for Normal output, and for FM output enable pre-emphasis but *not* pre-emphasize output, then Normal output is not processed separately!
- What is the pink line in the BS412 display? Maybe remove it. http://i.imgur.com/70mWvqp.png -> Ah no, it's the adjustment of the compressor thresholds. Needs to be added to Help page.
- BS412 has VERY narrow jump on de-basser from 240 to 250 Hz. (Jump of multiple dB's). -> No, brown line jumps but actual output is smooth, so no problem.
- BS412 bass filter doesn't use ITU1770 as it should but some weird other shape that goes up to about 250 Hz.
- Need to support 2 default values and a RESET TO LAST LOADED VALUE reset option.
- Hide not selected deprecated stuff - partially working!
- Move Copyright stuff etc. also to command line version (maybe just copy it?)

TODO:
- "Input without processing" doesn't work in stand alone version.
- Exciter: Add Volume slider
- Exciter: Add DIFF mode
- Voice protection in classic MB is broken. Check what changed. (Code should not have changed at all). - Hm, more has changed. Check in which version! -> Waiting for reply to question
- MB: Make Overview window for new Multiband! For main settings.
- MB: Add voice volume protection, don't allow mid bands to drop below surrounding (to some extent), protectes voices and it might help to replicate the sound of certain other processors :)
- Exciter: Make 2 kHz block size configurable, or automatic, or combination. Might work best if it's constant??
- Exciter: Add auto-adjust frequency
- Exciter: Optimize for LPF setting
- Exciter: Make it possible to choose where in the chain to run it
- Exciter: Improve further, and make it configurable.
- Add Polar stereo viewtopic.php?f=16&t=6233&p=33031#p33031
- MP3?
- Try adding phase delay compensation
- O skin
- Also show tooltips for blocks of parameters.
- Continue with finding parameters to hide
Author:  near05 [ Fri Feb 12, 2016 7:15 pm ]
Post subject:  Re: Stereo Tool 7.85 BETA
Wow this is unbelievable! By your recent changes the higher frequencies are incredibly great completed! The difference is really big!

You really did a awesome job!
Author:  fario [ Fri Feb 12, 2016 9:50 pm ]
Post subject:  Re: Stereo Tool 7.85 BETA
Quote:
7.85 BETA030

Windows 32 bit:
Windows stand alone: http://www.stereotool.com/download/ster ... 85-030.exe
Winamp DSP: http://www.stereotool.com/download/dsp_ ... 85-030.exe
Windows VST 32 bit: http://www.stereotool.com/download/vst_ ... 85-030.dll

Absolute Highs seems to be nearly finished now! Please set the "Pass squeeks" setting to 100% (default is 200%!). I kinda forgot to remove it, it's now determined automatically and the slider shouldn't be needed anymore (but setting it about 100% will still cause squeeky sounds).

CHANGED:
- Exciter: Try to improve tone behavior (should also reduce whole area around a spike I think - maybe configurable?)
- Add another AM test tone, sawtooth with cut off bottom
- Add 'Forcibly remove' to AM settings? Or is this a problem with the transmitter that the tester on Radioforum uses? -> Regardless, I've added it now.

OLD CHANGES:
- Fixed AM sawtooth test tone, adjusted level of other test tones when using AM.
- Fixed bug in HARD LIMIT introduced in BETA027 (caused crashes).
- Added slider to Exciter to choose between a more natural spectrum which however sounds more distorted, vs a very clean sound but with shrill tones in it. Will try to get rid of this slider and automatically choose the correct setting soon!
- Polar stereo: K filter added, but output is not strictly clipped anymore. Waiting for feedback.
- Add AM test tone: Sawtooth with pause at 0, asymmetrical. LPF needed?
- Fixed crackle at startup caused by Ignore high frequencies (even if it was disabled!)
- Loading old preset from before Analog mode was added apparently loads in Analog mode! -> Works now, just no idea why??
- Exciter: Crash should be fixed.
- Exciter: Sometimes you see darker bars in the spectrum, changing the overlap back and forth removes those, so somehow some levels aren't always calculated when a setting is changed.
- Fixed crash when closing
- Exciter: Moved to separate page, for now called Absolute Highs.
- Exciter: Added GUI element to show Absolute Highs effect.
- Exciter: Broken at latency 512
- GUI: Fixed hangups caused by tooltips.
- GUI: Remove dots in changed settings for some buttons on top of the screen.
- Exciter: Made frequency range configurable!!! (Old default numbers were 8000-9000 Hz)
- Blog post pre-processing, MP3 and declipping
- GUI: Added tooltips!
- Added exciter (rest of list removed)
- Added (not yet fully ok) Polar Stereo support for OIRT FM stations.
- Error (crash) on some systems should be solved
- Show something in settings that have been changed (for example a dot next to the name of the setting).
- Add license check function: extern "C" bool stereoTool_IsLicenseValid(gStereoTool* st_instance);
- Make scope skinnable
- Bug: i found one malfunction in the BS412 Section: If your switch off the FM Option and leave the BS412 Limiter in On-Position the Advanced Clipper only works in a reduced way: You can´t change the Clipper drive even if you pull the handle. The BS412 Limiter is greyed out instead so maybe someone doesn´t find the failure. If You switch the BS412 to off everything works fine again! Just a small detail, but maybe someone will have problems… -> I think I have fixed it (but there are a lot of different combinations of settings that can impact the result, I hope I haven't missed any). The next version shouldn't have this problem anymore, also, when BS412 is used I have now disabled the Advanced Clipper Drive slider.
I've been busy hiding a lot more deprecated features (if they are set to their default value). This should make the GUI a bit simpler. Stuff that's now hidden (still there and still functional if you really want to use it):
- "Bass AGC (Old)" panel
- "Classic Multiband Compressor" panel
- "Classic Singleband" panel
- "Pre-limiter" panel (in Advanced Clipper)
- "Leif's clipper efficiency modification" checkbox
- "Composite clipping Strictness (CPU)" checkbox
- Phase rotation: ""At start of processing" checkbox
- AGC "Compatibility & behavior" header
- All Singleband and Multiband "Compressor type" (Analog/Digital) pull-downs
- Multiband and Natural Dynamics "Compatibility mode (bad)" for Flat Frequency Response checkbox
- "Bass protection (Deprecated)" header in Advanced Clipper -> Bass
- "Highs gap protection: *" in Advanced Clipper -> Highs
- "Smooth slope" in Advanced Clipper -> Distortion
- "Upsampled highs clipping (useless)" in Advanced Clipper -> Distortion
- Stokkemask: "Force Stokkemask even if not using Composite Clipping (bad for audio)"
- BS412: ""De-basser non-ITU.1770 compatibility mode (bad)"
- Right clicking now restores default again, mid or double right clicking restores last loaded preset (or startup) value.
Bug: If you use FM and Normal output, with separately processed audio for streaming for Normal output, and for FM output enable pre-emphasis but *not* pre-emphasize output, then Normal output is not processed separately!
- What is the pink line in the BS412 display? Maybe remove it. http://i.imgur.com/70mWvqp.png -> Ah no, it's the adjustment of the compressor thresholds. Needs to be added to Help page.
- BS412 has VERY narrow jump on de-basser from 240 to 250 Hz. (Jump of multiple dB's). -> No, brown line jumps but actual output is smooth, so no problem.
- BS412 bass filter doesn't use ITU1770 as it should but some weird other shape that goes up to about 250 Hz.
- Need to support 2 default values and a RESET TO LAST LOADED VALUE reset option.
- Hide not selected deprecated stuff - partially working!
- Move Copyright stuff etc. also to command line version (maybe just copy it?)

TODO:
- Voice protection in classic MB is broken. Check what changed. (Code should not have changed at all). - Hm, more has changed. Check in which version! -> Waiting for reply to question
- MB: Make Overview window for new Multiband! For main settings.
- MB: Add voice volume protection, don't allow mid bands to drop below surrounding (to some extent), protectes voices and it might help to replicate the sound of certain other processors :)
- Exciter: Improve further, and make it configurable.
- Add Polar stereo viewtopic.php?f=16&t=6233&p=33031#p33031
- MP3?
- Try adding phase delay compensation
- O skin
- Also show tooltips for blocks of parameters.
- Continue with finding parameters to hide

7.85 Beta029 ??? is this realy beta030 because the titelbar say's v 029
Page 17 of 59 All times are UTC+02:00
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/