Stereo Tool :: Stereo Tool 7.73

In the command line version 7.73 my license key doesn't work.
I get the mesage: Error: -k: Key <xyxyxyxyxyxyxyxyx> is invalid.

I have checked a early version 7.50 and there my key is registered.

hi, I dont know where I could ask besides here so, every 64bit standalone version after 7.60 just crashes on startup and I have no idea why, I am on windows 10 and never had a problem with previous stereo tool versions, if you have any recommendation on what to do I would greatly appreciate it.

What is this SBC for? Keeping/getting back the original SB or achieving some user-defined SB?

What error message do you get, if any? This is the first report I'm getting about this, and all I can tell you is that it must be a bug in my code somewhere. Any info you can give me might help. Just to make sure: 32 bit is ok, and 7.60 64 bit worked? Which CPU do you have?

Quote:

the 32bit starts just fine, on the 64bit version when I do start it I see its light blue icon in my taskbar and then it just goes away again and is gone. I do have a AMD Phenom II X6 1090T as processor, 8GB RAM.

Quote:

I think it has something to do with Windows 10, I'm having a similar problem here. I was using v7.73 x64 (on my Win 10 machine) for about 2 hours and it crashed and closed without any error messages. Then when I tried to open it, it just disappears. I clicked on past versions (which I leave on my system) and they all open and close fine. I rebooted my system several times and still nothing, but without doing anything to that file (or my PC), it started working again the next day. My processor is an i7 970, 12 GB RAM. I tried the v7.73 again yesterday, it ran for over 8 hour without a problem. Go figure!

Btw, you weren't using VLC integration?

Author:	hvz [ Sun Aug 30, 2015 3:10 am ]
Post subject:	Re: Stereo Tool 7.73
Quote: In the command line version 7.73 my license key doesn't work. I get the mesage: Error: -k: Key <xyxyxyxyxyxyxyxyx> is invalid. I have checked a early version 7.50 and there my key is registered. Can you send me your key (in a PM or mail)? I've just tried it here and it works fine on the keys that I tried. Edit: Never mind, I found your key and it also doesn't work here. Will check it.

Author:	hvz [ Sun Aug 30, 2015 3:11 am ]
Post subject:	Re: Stereo Tool 7.73
Quote: hi, I dont know where I could ask besides here so, every 64bit standalone version after 7.60 just crashes on startup and I have no idea why, I am on windows 10 and never had a problem with previous stereo tool versions, if you have any recommendation on what to do I would greatly appreciate it. What error message do you get, if any? This is the first report I'm getting about this, and all I can tell you is that it must be a bug in my code somewhere. Any info you can give me might help. Just to make sure: 32 bit is ok, and 7.60 64 bit worked? Which CPU do you have?

Author:	hvz [ Sun Aug 30, 2015 3:18 am ]
Post subject:	Re: Stereo Tool 7.73
Quote: What is this SBC for? Keeping/getting back the original SB or achieving some user-defined SB? Getting back to the original, or better: More quickly getting out of the situation where one or two bands are down way too far. It will be configurable so you will be able to have it act more on some bands than on others.

Author:	FIX94 [ Sun Aug 30, 2015 3:19 am ]
Post subject:	Re: Stereo Tool 7.73
Quote: What error message do you get, if any? This is the first report I'm getting about this, and all I can tell you is that it must be a bug in my code somewhere. Any info you can give me might help. Just to make sure: 32 bit is ok, and 7.60 64 bit worked? Which CPU do you have? the 32bit starts just fine, on the 64bit version when I do start it I see its light blue icon in my taskbar and then it just goes away again and is gone. I do have a AMD Phenom II X6 1090T as processor, 8GB RAM.

Author:	Valiant [ Sun Aug 30, 2015 12:20 pm ]
Post subject:	Re: Stereo Tool 7.73
Quote: Quote: What error message do you get, if any? This is the first report I'm getting about this, and all I can tell you is that it must be a bug in my code somewhere. Any info you can give me might help. Just to make sure: 32 bit is ok, and 7.60 64 bit worked? Which CPU do you have? the 32bit starts just fine, on the 64bit version when I do start it I see its light blue icon in my taskbar and then it just goes away again and is gone. I do have a AMD Phenom II X6 1090T as processor, 8GB RAM. I think it has something to do with Windows 10, I'm having a similar problem here. I was using v7.73 x64 (on my Win 10 machine) for about 2 hours and it crashed and closed without any error messages. Then when I tried to open it, it just disappears. I clicked on past versions (which I leave on my system) and they all open and close fine. I rebooted my system several times and still nothing, but without doing anything to that file (or my PC), it started working again the next day. My processor is an i7 970, 12 GB RAM. I tried the v7.73 again yesterday, it ran for over 8 hour without a problem. Go figure!

Stereo Tool https://www.forums.stereotool.com/

Stereo Tool 7.73 https://www.forums.stereotool.com/viewtopic.php?t=6164	Page 2 of 24

Author:	mpex2006km [ Sun Aug 30, 2015 12:55 pm ]
Post subject:	Re: Stereo Tool 7.73
Hello bug found in GUI . If I set the quality slider to 50 or lower with Ignore High Frequencies set lower that 19kHz the FM output meter goes blank . (the two green ones in the far right). Not that important bug but it's a bug.. Thanks Hans.

Author:	DJ-DOGGY [ Sun Aug 30, 2015 12:59 pm ]
Post subject:	Re: Stereo Tool 7.73
Confirmed "Quality" bug and green indicators - below 50% they disappear , above 70% they again OK.

Author:	hvz [ Sun Aug 30, 2015 1:11 pm ]
Post subject:	Re: Stereo Tool 7.73
Quote: Quote: Quote: What error message do you get, if any? This is the first report I'm getting about this, and all I can tell you is that it must be a bug in my code somewhere. Any info you can give me might help. Just to make sure: 32 bit is ok, and 7.60 64 bit worked? Which CPU do you have? the 32bit starts just fine, on the 64bit version when I do start it I see its light blue icon in my taskbar and then it just goes away again and is gone. I do have a AMD Phenom II X6 1090T as processor, 8GB RAM. I think it has something to do with Windows 10, I'm having a similar problem here. I was using v7.73 x64 (on my Win 10 machine) for about 2 hours and it crashed and closed without any error messages. Then when I tried to open it, it just disappears. I clicked on past versions (which I leave on my system) and they all open and close fine. I rebooted my system several times and still nothing, but without doing anything to that file (or my PC), it started working again the next day. My processor is an i7 970, 12 GB RAM. I tried the v7.73 again yesterday, it ran for over 8 hour without a problem. Go figure! Which past version did you try that worked? 7.72? Or an older one? If this ever happens again, please send me your .ini file so I can check what's wrong! Btw, you weren't using VLC integration?

Author:	Valiant [ Sun Aug 30, 2015 2:09 pm ]
Post subject:	Re: Stereo Tool 7.73
I am using winamp v5.65 > VAC > ST v7.73 x64 SA. Other Standalone versions tried were (Releases)v7.72 x64, v7.71 x64, v7.70 x64. Betas: 771-026, 773-002, 771-028 (but these Betas are x32) Quote: Btw, you weren't using VLC integration? No I sent you a PM of my Window 10 error I did find... Faulting application name: StereoTool.exe, version: 0.0.0.0, time stamp: 0x55d915f9 Faulting module name: WINMMBASE.dll, version: 10.0.10240.16384, time stamp: 0x559f3a63

Author:	FIX94 [ Sun Aug 30, 2015 2:20 pm ]
Post subject:	Re: Stereo Tool 7.73
ok so I found the problem, I use Stereo Tool together with JACK Audio, for whatever reason as soon as I activate ASIO in 7.7x, it just quits out and doesnt open up anymore. Note that this even happens when the JACK server isnt even started up. Oh and I use the 64bit version because the 32bit version cant connect to JACK at all, it just says it failed, in the 64bit version at least it used to work fine.

Page 2 of 24	All times are UTC+02:00
Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/